Mobile, PC or Standalone VR for Schools: The Types, and What Each One Costs

Short answer: Not all "VR labs" are the same, and the type you choose decides both the price and what students can actually do. For a class set of about 10 devices: mobile VR costs around ₹3 lakh, PC VR around ₹15 lakh, and standalone VR around ₹4 lakh. But the cheapest isn't always the best fit. For real hands-on learning, the sweet spot is a standalone 6DOF (hands-on) headset — far cheaper than PC VR, and the only type where students actually do the experiment with their own hands.
When a school asks "how much is a VR lab?", the honest first answer is a question back: which type of VR? Because "VR lab" covers very different setups, and the gap between the cheapest and the dearest is huge — from around ₹3 lakh to ₹15 lakh for the same number of devices.
The price isn't the only thing that changes. So does what a student can do in the headset — from just looking around, to fully handling the equipment. This guide explains the main types in plain words, what each one costs, and which one actually suits a school.
Why do VR lab prices vary so much?
Because "VR" isn't one piece of hardware. There are three main types, and they're built very differently:
Mobile VR — a phone slotted into a simple headset holder.
PC VR — a headset wired to a powerful computer.
Standalone VR — an all-in-one headset that needs no phone or PC.
Each one costs a different amount and lets students do different things. Once you know which type you're looking at, the price makes sense.

The types of VR lab, and what each costs
Here's each type in plain words — what it is, what a student can do with it, and a rough price for a class set of about 10 devices.
1. Mobile VR — around ₹3 lakh (10 devices)
A smartphone slides into a cheap headset holder. It's the lowest-cost way into VR. What students can do: mostly look around a 360° scene. They can't reach in and handle anything — there's no hand control. The catch: it depends on having enough phones, the experience is basic, and it's closer to watching than doing. Fine for a quick taste of VR, not for real practicals.
2. PC VR — around ₹15 lakh (10 devices)
Each headset is wired to a powerful (gaming-grade) computer. It gives the highest-quality graphics. What students can do: full, high-end VR with movement and hand controls. The catch: it's by far the most expensive, because every headset needs its own costly PC. The cables limit movement, it's hard to set up for a whole class, and it isn't portable. Great for a specialist lab; heavy and dear for an ordinary school.
3. Standalone VR — around ₹4 lakh (10 devices)
An all-in-one headset: no phone, no PC, nothing wired. Everything runs inside the headset. This is the type most school VR labs use today — and it comes in two kinds:
3DOF (look-only). The student can look around — up, down, side to side — but can't move through the scene or use their hands. It's all-in-one, but still mostly watching.
6DOF (hands-on). The student can move naturally and use their own hands to pick things up, pour, build and handle equipment. This is the one where a student truly does the experiment.
The catch: only the 6DOF hands-on version gives real hands-on learning. A 3DOF headset at a similar price still leaves students watching, so for schools the 6DOF type is the one that earns its place.
📖 Read more: Hand Tracking vs Controllers in a School VR Lab — how students use their hands in 6DOF VR
The types side by side
Type | Rough cost (10 devices) | What students can do | Best for |
Mobile VR | ~₹3 lakh | Look around only | A cheap first taste of VR |
PC VR | ~₹15 lakh | Full VR, but wired to a PC | A specialist, high-end lab |
Standalone 3DOF | ~₹4 lakh | Look around, all-in-one | Viewing 360° content |
Standalone 6DOF (hands-on) | ~₹4 lakh | Move and use their hands to do experiments | Everyday hands-on school learning |
The headline from the table: PC VR is nearly four times the price of a standalone setup, yet a standalone 6DOF hands-on headset gives students the same real "doing" — without the costly computers, cables and setup. That's why most schools, from Gurugram to smaller towns like Ambala, land on standalone 6DOF.
Which type suits a school?
For most Indian schools, the answer is standalone 6DOF (hands-on) VR, and here's the honest reasoning:
Mobile VR is the cheapest, but students only watch. If the goal is real practicals, it falls short.
PC VR does everything, but the cost (around ₹15 lakh for 10 setups), the cables and the complex setup make it heavy for an ordinary school.
Standalone 6DOF sits in the sweet spot: students genuinely do the experiment with their hands, it's all-in-one with no PC to buy, it fits in a normal classroom, and at around ₹4 lakh it's a fraction of the PC-VR price.
So the cheapest option and the dearest option both miss the mark for everyday school science — one does too little, the other costs too much. The middle type does the real job for a sensible price.
One thing to remember: the headset is only part of the price
Whichever type you pick, the headset is just one part of what you pay for. The lessons, the teacher tools, the training and the support all sit on top of it — and they often matter more than the hardware. A cheap headset with no content and no support is no bargain.
So use these figures to understand the type you want, then look at the full package before you compare one quote to another.
📖 Read more: What Decides the Cost of a School VR Lab — the parts of the price beyond the headset type · How to Choose a VR Lab Provider for Your School in India
Where 9DXR Labs fits
To be clear about where we sit: 9DXR Labs is a standalone 6DOF (hands-on) VR lab — the type above that lets students actually do the experiment with their own hands, with no controllers and no PC.
Students work through 1,000+ NCERT-aligned lessons across science, maths and social science for Classes 1–12, with a one-tap teacher screen, an AI helper called Medha, and on-site training. It's all-in-one, fits in one ordinary classroom, and schools in Gurugram, Ambala, Muzaffarnagar and Bengaluru already run it.
The best way to judge the hands-on type for yourself is to see it work.
Frequently asked questions
How much does a VR lab cost for a school?
It depends on the type. For a class set of about 10 devices, mobile VR is roughly ₹3 lakh, standalone VR around ₹4 lakh, and PC VR around ₹15 lakh. The headset is only part of the cost — the lessons, teacher tools, training and support add to it and often matter more.
What's the difference between 3DOF and 6DOF VR?
3DOF lets a student look around a scene but not move through it or use their hands — they mostly watch. 6DOF lets a student move naturally and use their own hands to handle equipment, so they actually do the experiment. For hands-on school learning, 6DOF is the one that counts.
Why is PC VR so much more expensive?
Because every PC VR headset needs its own powerful computer to run it. Those computers are the biggest part of the cost, which is why PC VR can be around four times the price of an all-in-one standalone setup that does the hands-on job without them.
Which type of VR is best for schools?
For everyday hands-on learning, a standalone 6DOF headset is usually the best fit: students genuinely do the experiment, it's all-in-one with no PC, it fits in an ordinary classroom, and it costs far less than PC VR.
Read more from 9DXR Labs
Hand Tracking vs Controllers in a School VR Lab — how 6DOF hands-on actually works
Best Virtual Lab Platforms for Science: Which Kind Suits Your School? — screen vs headset, the bigger picture
How to Choose a VR Lab Provider for Your School in India — judging the full package, not just the headset
AR vs VR in Education: The Difference, for Schools — the terms, made simple




Comments